Mechanical punch press machine

  The mechanical punch press can be used to produce many products and its structure is very simple, thus the  mechanical punch press is a machine commonly used in production.  The main parts of the mechanical punch press machine include: motor, flywheel, crankshaft, slider, work bed ( work table), control buttons, frame, electric box and dies.

  The frame and bed of the mechanical punch press are basic components  of the mechanical punch press. They connect and fix all components of the [mechanical punch press for sale, ensure their relative position and motion relationship, bear all deformation forces during work, and form a closed force system with other mechanisms.

Motor of mechanical punch press. The motor converts electrical energy into circular motion of the flywheel. The flywheel of the mechanical punch press is driven by the motor in a circular motion and transmits the circular motion to the clutch and gears. And the  punch press mechanical clutch transmits the circular motion to the crankshaft. One end of the connecting rod is connected to the crankshaft, and the other end is connected to the slider. The connecting rod moves with the crankshaft and this movement becomes the up and down movement of the slider.

Dies are very components of the mechanical punch press machine. To finish the punching work two dies are are required. The upper die is fixed on the slider with screws and moves up and down with the slider and the lower die is fastened on the bolster plate. The piece of metal is placed on the lower die and the upper die hits the metal and the lower die when the upper die comes down. The design and production of the upper and lower dies are determined according to the shape of the product to be produced.

 The foot switch controls the slider for single or continuous punching. The foot switch is placed on the inside of the bed of the mechanical punch press machine, near the  right foot of the operator.